M Audio Music Mixer NVR10 User Manual

Quick Start Guide  
English  
 
2
NVR10  
|
Quick Start Guide  
If you do not have internet access, you can install the drivers packaged with the NRV10 by inserting the included  
FireWire Series CD-ROM into your computer’s CD drive. Your computer will automatically display the interactive  
install screen . (If the screen does not appear, you can manually start it by clicking on Start > My Computer >  
FireWire Series CD-ROM.) Select your product from the menu and click “install.”  
2. Follow the driver installer’s on-screen instructions.  
3. At various points during the installation process,  
you may be notified that the driver being  
installed has not passed Windows Logo Testing.  
Click “Continue Anyway” to proceed with the  
installation.  
4. Once the installer has completed, click “Finish.”  
5. Shut down your computer.  
6. Connect the NRV10 to a power outlet and to an  
available FireWire port on your computer.  
7. Power on the NRV10, then start your computer.  
 
NVR10  
|
Quick Start Guide  
3
8. Windows will identify the new interface and ask if you want  
to search the Internet for a driver. Select “No, not this time”  
and click “Next.”  
9. Windows will display the Found New Hardware Wizard.  
10. Select “Install software automatically” and click “Next.”  
11. When the Wizard has completed, click “Finish.”  
12. When the installation is complete, you will see a message  
stating “Your new hardware is installed and ready to use.”  
Your NRV10 will appear in Windows under Control Panel >  
Sounds and Audio Devices. The NRV10 Control Panel can be  
accessed by clicking on the red icon in the system tray.  
IMPORTANT: While it is possible to “hotplug” a FireWire device,  
it is strongly recommended that you connect or disconnect  
your NRV10 only when your computer is powered off. For more  
information on this issue, please visit the M-Audio knowledge base  
 
4
NVR10  
|
Quick Start Guide  
Installation Instructions for Mac OS X  
Make certain the NRV10 is not connected to your  
computer before beginning the installation.  
2. Follow the driver installer’s onscreen instructions.  
3. When the installer has completed, click “Close.”  
4. Shut down the computer.  
1. We recommend you download the latest NRV10  
drivers by going to the Support > Drivers page  
have the newest available drivers. Once you have  
downloaded the latest drivers, the downloaded  
file should automatically mount and display its  
contents on the desktop. (If the file does not  
mount automatically, simply double-click on the  
file once it has finished downloading to view  
its contents, then double-click on the installer  
application).  
5. Connect the NRV10 to a power outlet and to an  
available FireWire port on your computer.  
6. Power on the NRV10, then start your computer.  
Your NRV10 will appear in Mac OS X under System  
Preferences > Sound, in the Input and Output tabs.  
The NRV10 Control Panel will appear in System  
Preferences > Other.  
If you do not have internet access, you can  
install the drivers packaged with the NRV10 by  
inserting the included FireWire Series CD-ROM  
into your computer’s CD drive. Your computer  
will automatically display the CD-ROM icon  
on your desktop. Double-click on this icon to  
view the contents of the disk. Next, double-click  
“Open Me,” and select your product from the  
drop-down menu on the welcome screen and  
click “Install.”  
IMPORTANT: While it is possible to “hotplug” a  
FireWire device, it is strongly recommended that you  
connect or disconnect your NRV10 only when your  
computer is powered off. For more information on  
this issue, please visit the M-Audio knowledge base  
 
NVR10  
|
Quick Start Guide  
5
2
|
Connecting the NRV10  
Your NRV10 is equipped with five XLR mic inputs and eight 1/4” line inputs. Connect any combination of mic and  
line sources to these inputs, being sure to choose the appropriate input source on each channel’s corresponding  
Mic/Line selector. If you are connecting condenser microphones, be sure to activate the Phantom Power switch.  
You can connect external signal processors (typically dynamics processors) to any of the channel inserts on input  
channels 1 through 4, as well as to the rear-panel Main Mix insert. You can also connect external signal processors  
(typically reverbs or other multi-effects devices) to the NRV10’s Aux Send and Aux Return jacks.  
Connect your powered monitor speakers or power amp to the rear-panel Main Mix outputs. The Main Mix outputs  
are provided as both XLR and 1/4” TRS output connectors. Although both sets of connectors carry the same signal,  
it is recommended under most circumstances that only one set of outputs be connected at any time. (Connecting to  
both sets of outputs will not damage your mixer, but will result in reduced overall output levels.) You can connect an  
additional set of powered monitors or a monitor amp to the rear-panel Control Room outputs.  
And finally, connect the included FireWire cable from either of the NRV10’s rear-panel FireWire ports to your  
computer’s FireWire input.  
IMPORTANT: Routing signals incorrectly between the NRV10 and your computer-based DAW—in particular,  
pressing the pre/post EQ button in certain routing configurations—can result in a feedback loop that can damage  
your hearing and your equipment. Please refer to Section 10 of the included User Guide, “Monitoring Live Audio  
While Recording to Your DAW,” before you use your NRV10.  
 
6
NVR10  
|
Quick Start Guide  
3
|
Using the Control Panel  
The Control Panel provides you with the ability to monitor some of the NRV10’s basic functions and gives you  
control over some of its features. Refer to the User Guide for full information on using the Control Panel.  
4
|
Additional Information and Support  
news stories, FAQs and technical support. We recommend checking this site regularly to ensure you have the latest  
drivers and the most up-to-date information on your M-Audio product.  
© 2006 Avid Technology, Inc. All rights reserved. Product features, specifications, system requirements and  
availability are subject to change without notice. Avid, M-Audio and NRV10 are either trademarks or registered  
trademarks of Avid Technology, Inc. All other trademarks contained herein are the property of their respective  
owners.  
WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and  
birth defects or other reproductive harm. Wash hands after handling.  
NRV10  
Tested to comply with  
FCC standards  
FOR HOME OR STUDIO USE  
 
M-Audio USA  
|
5795 Martin Rd., Irwindale, CA 91706  
M-Audio Germany  
Technical Support  
|
Kuhallmand 34, D-74613 Ohringen, Germany  
tel: +49 (0)7941 - 9870030  
fax: +49 (0)7941 98 70070  
Technical Support  
tel (pro products): (626) 633-9055  
tel (consumer products): (626) 633-9066  
fax (shipping): (626) 633-9032  
tel: +49 (0)7941 98 7000  
fax: +49 (0)7941 98 70070  
Sales  
Web  
tel: 1-866-657-6434  
fax: (626) 633-9070  
Sales  
Web  
M-Audio Canada  
|
1400 St-Jean Baptiste Ave. #150, Quebec City,  
Quebec G2E 5B7, Canada  
M-Audio U.K.  
|
Floor 6, Gresham House, 53 Clarenden Road,Watford  
WD17 1LA, United Kingdom  
phone: (418) 872-0444  
fax: (418) 872-0034  
Technical Support  
tel: (Mac support): +44 (0)1765 650072  
tel: (PC support): +44 (0)1309 671301  
Technical Support  
phone: (866) 872-0444  
fax: (418) 872-0034  
Sales  
Web  
tel: +44 (0)1923 204010  
fax: +44 (0)1923 204039  
Sales  
Web  
M-Audio France  
|
Floor 6, Gresham House, 53 Clarenden Road,Watford  
WD17 1LA, United Kingdom  
tel : 0 810 001 105  
e-mail : [email protected]  
Renseignements  
Commerciaux  
PC : 0 0820 000 731  
MAC : 0 0820 391 191  
Assistance Technique  
Assistance Technique  
Site Web  
e-mail : [email protected]  
fax : +33 (0)01 72 72 90 52  
|
060104_NRV10_QSG_EN01  
 

Landice Treadmill 72070 User Manual
Learning Resources Baby Toy LER 6226 User Manual
Learning Resources Games Buy It Right User Manual
Lightolier Work Light LGS Series User Manual
Mackie Musical Instrument d4 Pro User Manual
Magic Chef Freezer MCCF5WBX User Manual
Mantis Trimmer Hedge Trimmer E System User Manual
Melissa Fryer 743 191 User Manual
Memorex Stereo System VX870 User Manual
Memorex VCR DBVT1341 User Manual