Manitowoc Ice Ice Maker E 1100 User Manual

K00019 STACKING KIT E-1100 & G-1700  
Installation Instructions  
Parts List:  
Item  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Description  
Lower Ice Chute Weldment (one with insulation)  
Upper Ice Chute Weldment  
Front Chute Support  
Top Front Mounting Bracket  
Bottom Front Mounting Bracket  
Bottom Rear Mounting Bracket (Angle )  
Top Rear Mounting Bracket (90)  
Water Shield Weldment  
Quantity  
Part Number  
6605514  
6605414  
6608614  
6605614  
6605714  
6213314  
6213214  
6653414  
6611814  
5027021  
5031841  
5202053  
5202103  
5429431  
5429531  
5489021  
5545111  
5573163  
8001953  
6236814  
9202393  
6604714  
2
2
1
1
1
2
2
1
1
1
2
14  
6
1
2
12  
2
1
1
8.  
9.  
Stabilizer Bracket  
10.  
11.  
12.  
13.  
14.  
15.  
16.  
17.  
18.  
19.  
20.  
21.  
22.  
#10-32 x 1/2 Machine Screw  
1/4-20 x 5/8 Hex Brass Machine Screw  
#10-24 x 5/8 Self-tapping Screw  
#10-24 x 3/8 Self-tapping Screw  
#10-32 Hex Nut  
1/4-20 Hex Nut  
#8-32 Wing Nut  
1/4 Split Ring Lock Washer  
#10 Split Ring Lock Washer  
Installation Instructions  
Locking Plate  
Foam Tape  
Corner Brace  
1
250”  
1
Installation Instructions:  
1. The K019 stacking kit is used for stacking two E-1100 machines, two G-1700 machines, or one E-1100 and one G-  
1700 machine. The bin must be leveled before proceeding to step 2.  
2. INSTALLATION OF CORNER BRACE:  
A. Remove foam tape, as shown on Illustration 1.  
B. Remove seven screws on the top of the bin and locate corner brace, as shown in Illustration 1. Secure with seven  
screws previously removed.  
C. Use foam tape from kit around the perimeter of corner brace, as shown in Illustration 1.  
3. INSTALLATION OF MACHINES:  
A. See service manual for uncrating and inspection of both machines.  
B. Remove top cover from lower machine.  
C. Set machine carefully and squarely on bin.  
D. Position water shield from kit, as shown in Illustration 2. Apply foam tape on the perimeter and across partition  
panel, as shown in Illustration 2.  
E. Set top machine carefully and squarely on bottom machine.  
F. Remove front, back, and side panel on the evaporator end of both machines.  
Manitowoc Ice, Inc.  
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
8001953  
Page 1 of 5  
Rev. 05/11/01  
 

KVH Industries Satellite TV System LF User Manual
KWC Indoor Furnishings K12H111000 User Manual
Lenovo Tablet 0C17961 User Manual
Macrom Stereo Amplifier 4215 User Manual
Marantz Projection Television DL5500 User Manual
Marantz Projector DLPTM 1080p User Manual
Maxtor Computer Drive 20255400 User Manual
Melissa Hair Dryer 635 066 User Manual
Metra Electronics Car Stereo System 99 8715 User Manual
MGE UPS Systems Power Supply EPS 8000 User Manual