PYLE Audio PYLE Plus Series PLCD44 User Manual

OWNER'S MANUAL  
ANTI-SHOCK COMPACT DISC PLAYER  
SUPER POWER OUTPUT  
AUXILIARY INPUT  
FACE DETACHABLE PANEL  
FM-AM FM-MPX RADIO RECEIVER  
WITH REMOTE CONTROL  
MODEL: PLCD44  
P / N : 570-961612-05  
10. PANEL RELEASE BUTTON  
This button is used to release the panel from the unit. To detach the front panel, press the button so that the left side of the  
panel is released. Grasp the released side and pull it off of the chassis. To re-attach the panel, insert the right side of the panel  
in place first and then press the left side of the panel until the chassis hold the panel firmly.  
11. MODE SELECTION  
Press this button to select Radio (TUNER), CD (S-CDP), or Auxiliary input (AUX) mode.  
12. LOCAL/DISTANT SELECTOR  
Press this button to prevent strong local stations from overlapping weaker stations. For normal operation, press this button again  
for distance.  
13. LOUD CONTROL  
Press this button to activate the loudness circuitry which compensates for loss of high and low frequencies during low volume  
levels.  
14. MUTE CONTROL  
Press this button to mute the volume control and “MUT” will appear on LCD display.  
15. AUDIO / SETTING SELECT  
Briefly press the button to select volume, bass, treble, balance or fader adjustment in cyclical mode.  
Whenpressingthebuttonformorethan2seconds,itactivatesasunitsettingselectionincyclicalmodeasfollowing.Theunitsettingcan  
bechangedbyusingeitherVOL+orVOLbutton.  
DSP OFF/ POP M/ ROCK M/ CLASS M/ FLAT M  
BEEPOFF/BEEPON(notavailableforthismodel)  
SEEK1(tuneup/downbuttonperformsfasttunefunction)/SEEK2(performsautotuningfunctionwhentuneup/downbutton  
pressedmorethan1second)  
COLOR 1 / COLOR 2 (not available for this model)  
VOL LAST / VOL ADJ (preset volume level when unit turn on)  
16/17. AUDIO LEVEL DOWN/UP CONTROL ( - Button ) / ( + Button )  
Press “SEL” button shortly and then pressing “+” or “-” button to adjust level of volume, bass, treble, balance or fader.  
• VOLUME - Press the (+) button to increase, or (-) button to decrease volume level.  
• BASS - While “BASS” is being displayed, press (+) button to increase or (-) button to decrease the bass level.  
• TREBLE - While “TREB” is being displayed, press (+) button to increase or (-) button to decrease the treble level.  
• BALANCE - While “BAL” is being displayed, press (+) or (-) button to level balance of speaker right and left.  
• FADER - While “FAD” is being displayed, press (+) or (-) button to level fader of speaker front and rear.  
18/19. MANUAL UP/DOWN TUNING / TRACK SEEK UP/DOWN CONTROL  
On radio mode, press the button will tune one frequency step higher or lower. Pressing the button more than 1 second can  
performs fast tuning function or auto tuning function.  
On CD mode, press this button will locate the beginning of the track being played or will locate the beginning of the next track.  
When pressing more than 2 seconds, it will move fast forward or fast backward to a specific position of a CD/MP3 track.  
20. STATION PRESET BUTTON (1-6)  
The PRESET BUTTONS on the unit are used to store station frequencies which you may wish to recall. Each preset button can  
store FM1, FM2, FM3, MW1, MW2 station frequency. Pressing the button momentarily recalls the station frequency which was  
memorized. There are 6 preset buttons, giving you capability of storing 18FM / 12MW.  
NOTE: When the preset button to be memorized is kept pressed for more than 2 seconds, the receiving station frequency will be  
stored in the button pressed. After this, the memorized station can be recalled by pressing the button once.  
On CD Mode  
Preset 1 - press this button to pause the disc played.  
Preset 2 - press this button to scan the first 10 seconds of all the tracks on the currently selected disc.  
Preset 3 - press this button to repeat the current track of the disc.  
Preset 4 - press this button to play disc at random order - Disc shuffle play.  
Page. 3  
P / N : 570-961612-05  
WIRE CONNECTION  
RESET FUNCTION  
The RESET button is located on the front of main panel. It  
is recessed in order to prevent accidental engagement,  
and can be activated with the tip of a ball-point pen or any  
similar pointed object. This reset circuitry is provided in  
order to protect the unit's microprocessor, and should only  
be activated under the following conditions :  
a) Initial installation after all wiring is completed.  
b) Abnormal operation is encountered such as numerical  
indication on display is erratic.  
c) Whenever the reset button is activated, all preset  
memory content will be erased and must be  
reprogrammed.  
CAUTION : Do not connect the speaker wires to  
chassis or car body. Each speaker wire cannot be  
soldered together with other wires. Otherwise, the  
unit will be damaged and no sound will come out  
anymore.  
REMOTE CONTROL  
INSTALLATION  
CAUTION : DO NOT PLACE THE UNIT OVER THE  
MAXIMUM INSTALLATION ANGLE OF 30°.  
OTHERWISE, THE UNIT MAY NOT WORK  
PROPERLY.  
WARNING!!  
Due to protection of CD Mechanism, two small screws on the top  
of the unit must be released before operate the unit. Otherwise, the  
CD Mechanism can not be working properly.  
UNIT REMOVAL  
1. Remove Front Control Panel.  
2. Slightly insert the key into the slot and  
gently to release.  
3. Separate the sleeve from the unit. Keep  
release key in a safe place as you may  
need for future removal of unit.  
P / N : 570-961612-05  
Page. 4  
P / N : 570-961612-05  

Rockford Fosgate Car Speaker FRC3246 User Manual
Radio Shack EC 293 User Manual
ProMaster FL1 Pro (Nikon) Digital Flash FL1 Pro (Nikon) User Manual
Orion eViewTM 8x32 LCD User Manual
Loewe CONNECT 32 User Manual
Lenmar Enterprises LENVIAR TXB46 User Manual
Lastolite TRIFLASH B90023 User Manual
Kenwood KVT727DVD User Manual
Kenwood Excelon DDX7015 User Manual
JVC KD R628 User Manual