Plantronics Bluetooth Headset Plantronics Explorer 210 Series User Manual

Plantronics Explorer® 210 Series  
User Guide  
Contents  
Welcome...............................................................................................ii  
What is Bluetooth®? ............................................................................iv  
Package Contents, Features and Accessories .....................................1  
Charging Your Headset ........................................................................2  
How to Charge Your Headset Using the AC Charger ..................2  
Pairing Your Headset ...........................................................................3  
Plantronics QuickPairTechnology .............................................3  
How to Pair Your Phone With Your Headset for the First Time .....4  
How to Pair Your Headset if it Has Been Previously Paired With  
Another Device ...........................................................................5  
Adjusting the Fit ...................................................................................6  
Headset Controls .................................................................................7  
Range ..................................................................................................8  
Indicator Lights ....................................................................................9  
Hands-Free Features .........................................................................10  
Troubleshooting .................................................................................11  
Product Specifications .......................................................................12  
iii  
®
What is Bluetooth ?  
Bluetooth wireless technology provides a way for devices to  
communicate with each other using short-range radio frequency instead  
of wires. Any two Bluetooth devices can communicate as long as they  
both have Bluetooth turned on, they are within range and they have  
been paired — a quick “handshake” process that connects the two  
devices. Bluetooth range is up to 10 metres (33 feet). Obstructions such  
as walls or other electronics devices can cause interference or shorten  
the effective range.  
NOTE For optimal performance, place your headset and phone on the  
same side of your body.  
iv  
Package Contents and Features  
Headset Front  
Power on/off  
Call control button  
Indicator light  
Volume control  
Earloop  
Headset Back  
Microphone  
Speaker/eartip  
Charging jack  
AC Charger  
100240V  
Plantronics Explorer® 210 Series Accessories*  
Vehicle Charging Adapter  
#76777-01  
USB Headset Charger  
#76016-01  
Vehicle Power Charger  
#78583-01  
* Not included. To order, please contact your Plantronics supplier or go  
1
Charging Your Headset  
1
2
How to Charge Your Headset Using the AC Charger  
Before using your headset for the first time, charge it for at least  
20 minutes. A full charge takes approximately two hours.  
1 Connect the AC charger to a power outlet.  
2 Plug the AC jack into the charging jack on the headset.  
While your headset is charging, the indicator glows red. When your  
headset is fully charged, the indicator turns off. Do not use your headset  
while it is connected to the charger.  
NOTE Never charge the battery where the temperature may fall below  
0°C (32°F) or rise above 40°C (104°F) – for example, in an unattended  
motor vehicle. Do not charge the battery while it is unattended.  
CHARGING TIME  
2 hours ...................  
Full charge  
20 minutes ..............  
Minimum charge  
before first use  
2
Pairing Your Headset  
Pairing is the process of introducing your headset to your phone.  
Before using your headset for the first time, you must pair it with  
your Bluetooth phone. Normally, you need to pair your headset with  
your phone only once.  
Plantronics QuickPairTechnology  
Your new headset includes Plantronics QuickPair technology to simplify  
the Bluetooth setup process. The first time you turn your headset on,  
your headset automatically enters pairing mode for 10 minutes (the  
indicator light flashes red and blue). Once paired successfully, your  
headset stays on for instant use.  
If not successfully paired after 10 minutes, your headset automatically  
goes to standby mode. When you turn the headset off then on again,  
it automatically goes into pairing mode until successfully paired with a  
Bluetooth phone.  
3
Pairing Your Headset – First Time  
1
2
3
SETTINGS  
Time and Date  
Phone Settings  
BLUETOOTH  
Bluetooth  
Sound Settings  
Network Services  
Security  
Discover/  
Search  
8BK;JEEJ>  
Reset Settings  
(NNFbWdjhed_Yi  
PASSKEY  
0000  
4
How to Pair Your Phone With Your Headset for the First Time  
1 Turn on the Bluetooth feature on your phone.  
For most phones, select Settings/Tools > Connections >  
Bluetooth > On. See your phones user guide for more information.  
2 Turn the headset on.  
Turn on your headset by sliding the power switch forward. Wait until  
the indicator light flashes blue and red.  
If you don’t see the red/blue flash,turn the headset off, wait, then  
turn it on again. Wait until you see the red/blue flash.  
3 Use the commands on your phone to locate your headset.  
For most phones, select Settings/Tools > Connections > Bluetooth >  
Search > 2XXPlantronics. See your phones user guide for  
more information.  
4 When prompted for the passkey, enter 0000.  
Pairing is successful when the indicator on your headset flashes  
blue. Your headset is now connected and ready to use.  
4
Pairing Your Headset  
3
1
BLUETOOTH  
Discover/  
Search  
8BK;JEEJ>  
(NNFbWdjhed_Yi  
PASSKEY  
4
2
0000  
How to Pair Your Headset if it Has Been Previously Paired  
With Another Device  
1 Turn the headset off.  
Slide the power switch off, then wait until the indicator turns red  
and then turns off.  
2 Turn the headset on.  
Slide the power switch on. After the headset is powered on, press  
and hold the call control button until the indicator light continues to  
flash red and blue.  
3 Use the commands on your phone to locate your headset.  
For most phones, select Settings/Tools > Connections > Bluetooth  
> Search > 2XXPlantronics. See your phones user guide for  
more information.  
4 When prompted for the passkey, enter 0000.  
Pairing is successful when the indicator on your headset flashes  
blue. Your headset is now connected and ready to use.  
5
Adjusting the Fit  
1
2
Right  
Left  
1 To remove the earloop, gently pull up on earloop near the  
Plantronics name until you hear a snap.  
2 Position earloop as shown above, then gently snap back  
onto post.  
3 Place the earloop behind your ear.  
4 Rotate the headset so that the speaker/eartip rests  
comfortably in your ear.  
5 Align the microphone with the corner of your mouth.  
Callers can hear you best when you point the microphone towards  
the corner of your mouth.  
4
3
5
6
Headset Controls  
Turn on the headset Slide the power switch on, then wait until the  
indicator glows blue. You will hear ascending tones.  
Turn off the headset Slide the power switch off, then wait until the  
indicator glows red. You will hear descending  
tones. When power is off, indicator stays off.  
Answer a call  
Briefly press the call control button.  
When you receive a call, your phone may ring  
before your headset rings. Wait until you hear  
the ring in your headset before you press the call  
control button to answer the call.  
Reject a call  
Make a call  
When phone rings, press and hold the call control  
button until you hear a single low tone.  
Enter number on your phone, press send, and  
the call is automatically transferred to headset;  
no need to press call control button.  
Adjust the volume  
Tap the volume + button to increase volume.  
At the upper limit you will hear two tones. Tap -  
button to decrease volume level. (There are eight  
volume levels.)  
WARNING Do not use headphones/headsets  
at high volumes for an extended period of time.  
Doing so can cause hearing loss. Always listen  
healthandsafety for more information on headsets  
and hearing.  
7
Headset Controls  
Transfer a call from While in a call, press and hold the call control  
headset to phone  
button until you hear a single low tone.  
Transfer a call from While in a call, press and hold the call control  
phone to headset  
button until you hear a single low tone.  
Range  
To maintain a connection, keep your headset within 10 metres (33 feet)  
of the Bluetooth device. If there are obstacles between your headset and  
the device, you may experience interference. For optimal performance,  
place your headset and phone on the same side of your body.  
Audio quality degrades as you move out of range. When you are far  
enough away to lose the connection, you hear a high tone in the headset.  
NOTE The headset attempts to reconnect for 30 seconds. If you move  
back in range after 30 seconds pass, you can manually reconnect by  
pressing the call control button.  
NOTE Audio quality is also dependent upon the device with which the  
headset is paired.  
8
Indicator Lights  
Headset Status  
Headset Indicator Light  
Powering on  
Steady blue, then intermittent flashes  
(changes to standby mode)  
Powering off  
Standby  
Red appears and goes off  
Blue intermittent flashes  
Charging battery  
Red solid light. Light indicator turns off when  
battery is fully charged and headset is off.  
Low battery  
Pairing mode  
Missed call  
Triple red flashes  
Blue/red alternating flashes  
Purple flashes. Press the call control button  
to cancel flashing light.  
Incoming call  
Triple blue flashes when ringing.  
9
Hands-Free Features  
If your phone and your wireless service provider both support hands-free  
operation, you can use the following features:  
Redial the last number  
To activate last number redial, double  
press the call control button. You will  
hear a double tone after each double-  
button press.  
Using Voice Dialling  
With the headset on, press the call  
control button for 2 seconds to activate  
the voice dialling.  
NOTE To use voice-activated dialling, the  
voice-dialling feature must be enabled on  
your phone. See your Bluetooth phone  
manual for instructions.  
Reject a call  
When receiving an incoming call, press the  
call control button for 2 seconds to reject  
the call.  
10  
Troubleshooting  
My headset  
Headset was not in pairing mode when mobile  
does not work  
with my phone.  
phone menu selections were made. See page 5  
“Pairing Your Headset.”  
Incorrect menu selections were made on  
your mobile phone. See page 5 “Pairing Your  
Headset.”  
I did not enter  
my passkey.  
Your phone did not locate the headset.  
Repeat the pairing process on page 5.  
Incorrect menu selections were made on your  
mobile phone. Repeat the pairing process on  
page 5.  
Callers cannot hear The headset is not turned on or the headset is  
me, or I cannot  
hear caller/dialling  
tone.  
not connected to mobile phone. Press the call  
control button for 2 seconds until you hear a  
beep or make sure the power switch is in the ON  
position by sliding switch up and down again.  
Your headset is out of range. Move the headset  
closer to the phone or Bluetooth device.  
Your headset battery is drained. Charge your  
battery using the AC power adapter supplied.  
The listening volume is too low. Tap the volume +  
key to increase the sound heard in the headset.  
11  
Product Specifications  
Talk Time*  
Standby Time*  
Charge Time  
Range  
Up to 7 hours  
Approximately 8 days or 200 hours  
2 hours  
Up to Bluetooth standard 10 metres (33 feet)  
Power Requirements 5V DC – 180 mA  
Battery Type  
Rechargeable, non-replaceable,  
lithium ion polymer  
Storage/Usage  
Temperature  
10 °C – 40 °C (50 °F – 104 °F)  
Version  
Bluetooth 2.0  
Supports Bluetooth hands-free and headset profiles.  
* Battery enabled. Performance may vary by device.  
12  
For safety information, see the separate “For Your Safety” booklet.  
For warranty information, see the separate “2 Year Warranty” leaflet or visit  
en  
nl  
Plantronics Ltd  
Wootton Bassett, UK  
Tel: 0800 410014  
Finland  
Tel: 0800 117095  
Plantronics B.V.  
Hoofddorp, Nederland  
Tel: (0)0800 Plantronics  
0800 7526876 (NL)  
fr  
ar  
Plantronics Sarl  
Noisy-le-Grand  
France  
00800 75268766 (BE/LUX)  
no  
Norge  
Tel: 80011336  
cs  
ga  
pl  
Czech Republic  
Plantronics BV  
Regus House  
Harcourt Centre  
Harcourt Road  
Dublin 2  
6Wnꢀjonh`VÈꢀl^åXZ_ꢀ  
^c[dgbVX_^/ꢀꢀ  
lll#eaVcigdc^Xh#Xdb  
da  
Danmark  
Tel: 80 88 46 10  
pt  
Ireland  
Portugal  
Tel: 0800 84 45 17  
de  
Service ROI: 1800 551 896  
Plantronics GmbH  
Hürth, Deutschland  
he  
ro  
:
באתר
 
בקר
 ,
נוסף
 
למידע
 
EZcigjꢀ^c[dgbVIJ^^ꢀꢀ  
lll#eaVcigdc^Xh#Xdb  
Kundenservice:  
Deutschland 0800 9323 400  
Österreich 0800 242 500  
Schweiz 0800 932 340  
hu  
ru  
További információk:  
dÍÎÍÊÌÇÑÄÊÛÌ¿¾ꢀ  
ÇÌÓÍÏË¿ÕǾꢁꢀ  
XXXꢂQMBOUSPOJDTꢂDPN  
el  
it  
Για περισσότερες  
πληροφορίες:  
sv  
Plantronics Acoustics  
Italia Srl  
Milano, Italia  
Sverige  
Tel: 0200 21 46 81  
es  
Numero Verde: 800 950934  
tr  
Plantronics Iberia, S.L.  
Madrid, España  
Tel: 902 41 51 91  
Daha fazla bilgi için:  
13  
МЛ05  
Plantronics B.V.  
Scorpius 140  
2132 LR Hoofddorp  
Netherlands  
© 2009 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics  
Explorer, QuickPair and Sound Innovation are trademarks or registered trademarks of  
Plantronics, Inc. The Bluetooth word mark and logo are owned by Bluetooth SIG, Inc. and  
any use of such marks by Plantronics, Inc. is under license. All other trademarks are the  
property of their respective owners.  
U.S. Patents Pending  
82216-03 Rev A  

Rinnai Q205S User Manual
Radio Shack 65 541 User Manual
Planar Systems Car Video System PXL2451MW User Manual
Pioneer DCS 353 User Manual
Pioneer Car Video System S HTD1 User Manual
Philips SJM2305 User Manual
Milwaukee 9572 User Manual
Kenwood KDC V7018R User Manual
Kenwood Car Stereo System AT 130 User Manual
JVC KD R310 User Manual